Power Semiconductor Terms Explained: SiC, GaN and IGBT
Devices that switch and convert electrical power, from silicon MOSFETs and IGBTs to SiC and GaN, and the module, packaging and reliability issues that come with high voltage and heat.
Switching power efficiently
Power semiconductors control the flow of electricity in inverters, chargers, motor drives and power supplies. Silicon MOSFETs and IGBTs dominate today, while silicon carbide and gallium nitride devices reduce losses at higher voltage or frequency. Breakdown voltage, on-resistance and switching loss are the figures that matter.
Because power devices run hot and switch large currents, packaging, die attach and thermal design are as important as the chip itself.
Japan's role
Mitsubishi Electric, Fuji Electric, Toshiba and ROHM are major power semiconductor makers, and Japanese companies also supply SiC substrates and processing equipment.
All power semiconductors terms (22)
- Avalanche Capability (Avalanche Energy)The energy a power device can absorb without failing when driven into avalanche breakdown, rated as EAS and EAR.
- Body DiodeThe parasitic pn diode formed between the body and drain of a power MOSFET, often used as a freewheeling diode.
- Breakdown VoltageThe maximum voltage a power device can block in the off state before avalanche breakdown, set mainly by drift-layer thickness and doping.
- Current CollapseA GaN HEMT effect in which on-resistance rises and current drops after the device has blocked a high voltage, caused by trapped electrons.
- DC-DC ConverterA circuit that converts one DC voltage to another by fast switching and energy storage in inductors and capacitors.
- Diamond SemiconductorA research-stage semiconductor using diamond crystal, with a 5.5 eV bandgap and very high thermal conductivity for extreme power devices.
- Double Pulse TestThe standard method for measuring switching behaviour and losses of power devices using two gate pulses and an inductive load.
- Double-Sided CoolingA power module structure that removes heat through both the top and bottom faces of the chip, lowering thermal resistance.
- Freewheeling Diode (FWD)A diode that gives inductor current a path when a switch turns off, preventing voltage spikes; paired with each IGBT in an inverter.
- IGBT (Insulated Gate Bipolar Transistor)A voltage-driven power switch that combines a MOSFET gate with bipolar conduction, used in inverters for motors, trains, EVs and renewable energy.
- Junction Temperature / Thermal ResistanceTj is the temperature of a chip's active region; thermal resistance (Rth) describes how hard it is for heat to flow out of it.
- Normally-off (Enhancement Mode)A transistor that conducts no current with zero gate voltage and turns on only when a positive gate voltage is applied.
- Power ModuleA package that combines several power semiconductor chips with insulation, wiring and a heat path, forming the switching core of inverters.
- Power SemiconductorSemiconductor devices built to switch, convert and rectify electric power at high voltage and current, such as power MOSFETs, IGBTs and diodes.
- Reverse RecoveryThe brief reverse current a pn diode conducts when switched from forward to reverse bias, until stored carriers are removed.
- Safe Operating Area (SOA)The range of voltage and current combinations in which a power semiconductor can operate without failing, shown as a datasheet graph.
- SiC MOSFET (Silicon Carbide MOSFET)A power MOSFET built in silicon carbide instead of silicon, switching high voltages fast and efficiently; widely used in EV inverters and chargers.
- Super Junction MOSFETA power MOSFET with alternating p- and n-type pillars in the drift layer, giving high breakdown voltage with low on-resistance in silicon.
- Switching LossPower lost each time a power device turns on or off, when voltage and current overlap; it rises in proportion to switching frequency.
- Trench MOSFETA power MOSFET whose gate sits in a vertically etched trench, giving a vertical channel, higher cell density and lower on-resistance.
- Voltage RegulatorA circuit or IC that holds its output voltage constant despite changes in input voltage or load current.
- Wide Bandgap Semiconductor (WBG)Semiconductor materials with a bandgap much wider than silicon's, mainly SiC and GaN, used for efficient high-voltage, high-temperature and high-frequency devices.
Power semiconductors comparisons
Related pages
Glossary
Power semiconductors terms
- Avalanche Capability (Avalanche Energy)
- Body Diode
- Breakdown Voltage
- Current Collapse
- DC-DC Converter
- Diamond Semiconductor
- Double Pulse Test
- Double-Sided Cooling
- Freewheeling Diode (FWD)
- IGBT (Insulated Gate Bipolar Transistor)
- Junction Temperature / Thermal Resistance
- Normally-off (Enhancement Mode)
- Power Module
- Power Semiconductor
- Reverse Recovery
- Safe Operating Area (SOA)
- SiC MOSFET (Silicon Carbide MOSFET)
- Super Junction MOSFET
- Switching Loss
- Trench MOSFET
- Voltage Regulator
- Wide Bandgap Semiconductor (WBG)
- SiC vs GaN: what is the difference?
- SiC vs silicon: what is the difference?
- Gallium oxide vs SiC: what is the difference?
- SiC MOSFET vs IGBT: what is the difference?
Last updated: November 1, 2026