Ion Implantation and Annealing Terms Explained
How dopants are placed in silicon and activated: ion implantation, annealing, oxidation and the furnaces and rapid thermal tools that control the thermal budget.
Doping and heat
Ion implantation accelerates dopant ions such as boron, phosphorus and arsenic into the wafer to set where current can flow. Implantation damages the crystal, so the wafer is then annealed to repair it and activate the dopants. Every heating step also lets dopants diffuse, which is why engineers track the total thermal budget of a process.
Thermal oxidation, batch furnaces, rapid thermal processing and laser annealing are the main tools; each trades temperature, time and uniformity differently.
Japanese suppliers
KOKUSAI ELECTRIC and Tokyo Electron make batch furnaces, SCREEN makes flash and laser anneal systems, and Japanese companies such as Sumitomo Heavy Industries Ion Technology and Nissin Ion Equipment build ion implanters.
All ion implantation and thermal processing terms (20)
- Antimony (Sb)A heavy, slow-diffusing donor used mainly for low-resistivity n+ substrates of epitaxial wafers and for buried layers.
- Arsenic (As)A heavy, slow-diffusing donor used for shallow nMOS source/drain junctions, and a constituent of compound semiconductors such as GaAs.
- Boron (B)The standard acceptor that makes silicon p-type; light and fast-diffusing, so shallow boron junctions need special implant and anneal methods.
- Cryogenic Ion ImplantationIon implantation with the wafer cooled to around −100 °C or below, giving cleaner amorphisation and fewer defects after annealing.
- Dopant ActivationHeat treatment that moves implanted dopant atoms onto silicon lattice sites so they release electrons or holes, while limiting diffusion.
- DopingAdding tiny, controlled amounts of impurities (dopants) to a semiconductor to make it n-type or p-type and set its resistivity.
- End Station (Ion Implanter)The part of an ion implanter that holds the wafer and where ions are actually implanted, controlling scanning, tilt, dose and charging.
- Fick's Laws of DiffusionThe basic laws describing how a substance spreads from high to low concentration; the basis for calculating dopant diffusion during annealing.
- Forming GasA non-flammable mixture of nitrogen with a few percent hydrogen, used to passivate interface defects in MOS devices and prevent oxidation in assembly.
- High Energy Ion ImplantationIon implantation at several hundred keV to several MeV, used to form doped layers several micrometres below the silicon surface.
- Implant DoseThe number of ions implanted per unit area of wafer, in atoms/cm²; energy sets how deep they go, dose sets how many.
- Ion ChannelingThe deep penetration of implanted ions that travel along open directions in the silicon crystal, producing a long tail in the dopant profile.
- Lightly Doped Drain (LDD)A MOSFET structure with a lightly doped region at the gate edge of the drain that reduces the peak electric field and hot-carrier damage.
- Phosphorus (P)The most widely used donor that makes silicon n-type, used for n-wells, LDD regions, solar cell emitters and Si:P source/drain epitaxy.
- Pre-Amorphization Implant (PAI)An implant of heavy neutral ions such as germanium that makes the silicon surface amorphous before doping, preventing channeling and aiding activation.
- Projected Range (Rp)The mean depth at which implanted ions come to rest in the wafer; with its spread, ΔRp, it describes the as-implanted dopant profile.
- Ramp RateThe speed at which temperature is raised or lowered in a thermal process; faster ramps cut time at high temperature but risk wafer slip.
- Spike AnnealA rapid thermal anneal that ramps up very fast, passes the peak temperature without a hold and cools at once, activating dopants with little diffusion.
- Thermal BudgetThe total heat, temperature integrated over time, that a wafer receives during processing and that a device can tolerate before dopants and films degrade.
- Transient Enhanced Diffusion (TED)A burst of very fast dopant diffusion, especially of boron, early in the anneal after ion implantation, caused by implant damage.
Ion implantation and thermal processing comparisons
Related pages
Glossary
Ion implantation and thermal processing terms
- Antimony (Sb)
- Arsenic (As)
- Boron (B)
- Cryogenic Ion Implantation
- Dopant Activation
- Doping
- End Station (Ion Implanter)
- Fick's Laws of Diffusion
- Forming Gas
- High Energy Ion Implantation
- Implant Dose
- Ion Channeling
- Lightly Doped Drain (LDD)
- Phosphorus (P)
- Pre-Amorphization Implant (PAI)
- Projected Range (Rp)
- Ramp Rate
- Spike Anneal
- Thermal Budget
- Transient Enhanced Diffusion (TED)
- Ion implantation vs thermal diffusion: what is the difference?
Last updated: November 1, 2026