Semiconductor Inspection and Metrology Terms Explained
How fabs find defects and measure what they have built: optical and e-beam inspection, CD-SEM, overlay, film thickness and the analysis methods used to trace yield loss.
Seeing what went wrong
Inspection looks for defects across the wafer; metrology measures specific dimensions such as line width, overlay and film thickness. Review and analysis tools then classify the defects and find their cause. Together they feed process control loops that keep yield high.
As features shrink below what optics can resolve, fabs combine optical tools for speed with electron-beam tools for resolution, and increasingly rely on data analysis to connect measurements to yield.
Japanese suppliers
Hitachi High-Tech is a leading maker of CD-SEMs, Lasertec makes EUV mask inspection systems, and HORIBA, SCREEN and others supply measurement equipment used throughout the fab.
All inspection and metrology terms (31)
- Actinic inspectionInspecting EUV photomasks with the same 13.5 nm light used in EUV lithography, to find the defects that will actually print.
- Advanced Process Control (APC)Automatic adjustment of tool recipes using measured wafer results, so each process step stays on target despite drift and incoming variation.
- Atomic Force Microscopy (AFM)A microscope that traces a surface with a sharp tip on a flexible cantilever to map its 3D height profile with sub-nanometre vertical resolution.
- Bragg's LawThe condition nλ = 2d sin θ under which waves reflected from parallel crystal planes reinforce each other; the basis of X-ray diffraction.
- CantileverA beam fixed at one end whose free end bends in proportion to applied force; used in AFM probes, probe card needles and MEMS devices.
- Capacitance-Voltage (C-V) MeasurementMeasuring a MOS structure's capacitance while sweeping voltage, to extract oxide thickness, doping, flat-band voltage and interface traps.
- CD-SEM (Critical Dimension SEM)A dedicated scanning electron microscope that measures the width and shape of circuit patterns on wafers with nanometre precision.
- Chemical Shift (XPS)A small change in measured binding energy that reveals an element's chemical bonding, used in XPS to identify oxidation states such as Si versus SiO₂.
- Ellipsometry (Spectroscopic Ellipsometry)An optical method that measures how a film changes the polarisation of reflected light to determine thickness and refractive index without contact.
- Energy Dispersive X-ray Spectroscopy (EDX / EDS)Elemental analysis that reads the characteristic X-rays emitted under an electron beam, usually in an SEM or TEM, to map composition.
- Focused Ion Beam (FIB)A finely focused beam of ions, usually gallium, that mills, images or deposits material at chosen spots with nanometre precision.
- Gage R&R (Gauge Repeatability and Reproducibility)A study that quantifies how much of the variation seen in measurements comes from the measuring system itself rather than the product.
- In-situMeasurement or processing done inside the process tool, during or between steps, without taking the wafer out; the opposite of ex-situ.
- Inline (Inline Metrology and Inspection)Measurement or inspection of product wafers inside the production line, right after process steps, so problems are caught early.
- Light Point Defect (LPD)Any feature on an unpatterned wafer that scatters a scanning laser and shows up as a bright point: particles, crystal pits, scratches or bumps.
- Photoluminescence (PL)Light emitted when a semiconductor excited by a laser releases energy as electrons and holes recombine; used to assess composition and crystal defects.
- Process Capability Index (Cp, Cpk)Numbers that compare a process's spread and centring with its specification limits, showing how reliably it produces in-specification output.
- Process ControlThe measurements, statistical monitoring and automatic corrections that keep every fab process step on target and stable from wafer to wafer.
- Raman SpectroscopyAn optical method that measures tiny wavelength shifts in scattered laser light to reveal stress, composition and crystal quality.
- Scanning Electron Microscope (SEM)A microscope that scans a focused electron beam across a sample and builds an image from the emitted electrons, resolving features near 1 nm.
- Secondary Ion Mass Spectrometry (SIMS)A destructive analysis method that sputters a sample with an ion beam and mass-analyses the ejected ions to measure trace elements versus depth.
- Sheet Resistance (Rs)The resistance of a thin conductive layer expressed in ohms per square (Ω/sq), equal to resistivity divided by thickness; a standard monitor for implant, anneal and metal films.
- Statistical Process Control (SPC)Monitoring of process measurements with control charts to detect when a manufacturing step departs from its normal, stable behaviour.
- Total Reflection X-ray Fluorescence (TXRF)An X-ray fluorescence method that strikes the wafer at a grazing angle so X-rays reflect, revealing trace metal contamination on the surface.
- Uniformity (Within-Wafer and Wafer-to-Wafer)How evenly a process result such as film thickness, etch depth or line width is reproduced across a wafer, between wafers and between lots.
- X-ray Absorption Near Edge Structure (XANES)The fine structure of an X-ray absorption spectrum near an element's absorption edge, used to determine oxidation state and local atomic structure.
- X-ray Diffraction (XRD)A non-destructive method that measures the angles at which a crystal diffracts X-rays to reveal its phase, lattice spacing, strain and quality.
- X-ray Fluorescence (XRF)A non-destructive method that identifies and quantifies elements from the characteristic X-rays they emit when excited by an X-ray beam.
- X-ray Photoelectron Spectroscopy (XPS)A surface analysis method that measures electrons emitted under X-rays to identify the elements in the top few nanometres and their chemical state.
- YieldThe share of chips on a wafer, or wafers in a line, that work and meet specification; the main driver of the cost per good chip.
- Yield ManagementThe organised use of defect, process, test and failure-analysis data to find and remove the causes of yield loss in a wafer fab.
Inspection and metrology comparisons
Related pages
Glossary
Inspection and metrology terms
- Actinic inspection
- Advanced Process Control (APC)
- Atomic Force Microscopy (AFM)
- Bragg's Law
- Cantilever
- Capacitance-Voltage (C-V) Measurement
- CD-SEM (Critical Dimension SEM)
- Chemical Shift (XPS)
- Ellipsometry (Spectroscopic Ellipsometry)
- Energy Dispersive X-ray Spectroscopy (EDX / EDS)
- Focused Ion Beam (FIB)
- Gage R&R (Gauge Repeatability and Reproducibility)
- In-situ
- Inline (Inline Metrology and Inspection)
- Light Point Defect (LPD)
- Photoluminescence (PL)
- Process Capability Index (Cp, Cpk)
- Process Control
- Raman Spectroscopy
- Scanning Electron Microscope (SEM)
- Secondary Ion Mass Spectrometry (SIMS)
- Sheet Resistance (Rs)
- Statistical Process Control (SPC)
- Total Reflection X-ray Fluorescence (TXRF)
- Uniformity (Within-Wafer and Wafer-to-Wafer)
- X-ray Absorption Near Edge Structure (XANES)
- X-ray Diffraction (XRD)
- X-ray Fluorescence (XRF)
- X-ray Photoelectron Spectroscopy (XPS)
- Yield
- Yield Management
- SEM vs TEM: what is the difference?
- XPS vs EDX: what is the difference?
Last updated: November 1, 2026