Semiconductor Materials Terms Explained
The chemicals, gases, films and substrates consumed in chipmaking: photoresists, specialty gases, high-purity chemicals, sputtering targets, packaging materials and the purity standards they must meet.
What a fab consumes
A fab uses hundreds of materials. Some end up in the chip, such as silicon, dielectric films and copper; others, such as resists, etch gases and cleaning chemicals, are consumed in the process. Purity is measured in parts per billion or better, and a change of supplier usually needs a long qualification.
Japan's role
Materials are where Japan's share is highest. Japanese companies supply most of the world's photoresist, silicon wafers and several high-purity chemicals and packaging materials. Shin-Etsu Chemical, SUMCO, JSR, Tokyo Ohka Kogyo, Resonac, Sumitomo Chemical and Ajinomoto appear throughout this section.
All materials terms (37)
- ABF (Ajinomoto Build-up Film)The insulating film between the wiring layers of package substrates for high-performance processors, made by Ajinomoto.
- Aluminium Nitride (AlN)An electrically insulating ceramic that conducts heat well, used for power-module substrates, heaters and chucks, and as a thin film in GaN and RF filters.
- Arsine (AsH3)One of the most toxic gases in chip making, used to dope silicon with arsenic and as the arsenic source for growing GaAs by MOCVD.
- Buffer LayerAn intermediate layer between a substrate and the active device layer that reduces defects, strain and cracking caused by mismatched materials.
- Carbon Tetrafluoride (CF4)The simplest perfluorocarbon gas, used to dry-etch oxide, nitride and silicon; extremely stable and very hard to destroy in abatement.
- Compound SemiconductorA semiconductor made of two or more elements, such as GaAs, GaN, SiC or InP, used where silicon cannot deliver the speed, light or voltage needed.
- Copper (Cu)Metal second only to silver in conductivity, used for on-chip interconnects, bonding wire, bumps, substrates and hybrid bonding.
- Crystal Defect (Lattice Defect)Any place where the periodic arrangement of atoms in a crystal is broken; defects cause leakage and short carrier lifetime but are also used for gettering.
- Crystal Plane OrientationThe crystal plane along which a wafer surface is cut, given in Miller indices such as (100) or (111), a key wafer specification.
- Crystal StructureThe regular, repeating three-dimensional arrangement of atoms in a solid; in semiconductors it shapes band structure, mobility and how wafers are processed.
- Diborane (B2H6)A toxic, pyrophoric boron hydride gas used for in-situ p-type doping of silicon and SiGe in epitaxy and polysilicon CVD.
- DislocationA line defect along which atoms are out of register; kept out of silicon wafers but common in GaN and SiC, where it limits yield and reliability.
- Electronic Grade ChemicalsProcess chemicals such as hydrofluoric acid, sulphuric acid and hydrogen peroxide purified to trace metal levels in the ppt range for wafer cleaning and etching.
- Gallium Arsenide (GaAs)A III-V semiconductor with a direct 1.42 eV bandgap and fast electrons, used in phone RF amplifiers, infrared emitters, VCSELs and space solar cells.
- Gallium Nitride (GaN)A III-V wide-bandgap semiconductor used for blue and white LEDs, fast power transistors and high-power RF amplifiers.
- Hexagonal Boron Nitride (hBN)A layered insulator of boron and nitrogen with graphene's hexagonal lattice, used as an atomically flat substrate and dielectric for 2D materials.
- Hydrogen Bromide (HBr)A corrosive gas used for precise dry etching of silicon and polysilicon, valued for high selectivity to oxide and vertical sidewalls.
- IGZO (Indium Gallium Zinc Oxide)An oxide semiconductor of indium, gallium, zinc and oxygen that works even when amorphous, used in display transistors and studied for low-leakage memory.
- II-VI Compound SemiconductorSemiconductors made from zinc, cadmium or mercury combined with sulphur, selenium, tellurium or oxygen, used in solar cells, infrared sensors and quantum dots.
- Indium Phosphide (InP)A III-V semiconductor whose lattice-matched alloys emit and detect light at 1.3 and 1.55 µm, the substrate for optical-communication lasers.
- Interplanar Spacing (d-spacing)The distance d between parallel atomic planes of the same orientation in a crystal, which sets diffraction angles in X-ray diffraction.
- Lattice ConstantThe edge length of a crystal's repeating unit cell, about 0.543 nm for silicon; mismatch between layers decides whether epitaxy works.
- MEMS (Micro-Electro-Mechanical Systems)Tiny mechanical structures such as sensors, mirrors and nozzles made with semiconductor microfabrication and combined with electronics.
- Miller IndexA notation of three integers, such as (100) or [111], that identifies planes and directions in a crystal and specifies wafer orientation.
- Nitrogen Trifluoride (NF3)A fluorine gas used mainly to clean CVD chambers with remote plasma; a potent greenhouse gas destroyed in abatement systems.
- Phosphine (PH3)A highly toxic phosphorus hydride gas used to dope silicon n-type in epitaxy, polysilicon CVD and ion implantation, and as a source for InP growth.
- Plastic DeformationDeformation that remains after the load is removed; in chipmaking it causes slip and warpage in hot wafers and fatigue in solder joints.
- Silicon (Si)Element 14, the base material of most semiconductor devices, refined from quartz into eleven-nines polysilicon and single-crystal wafers.
- Silicon Carbide (SiC)A wide-bandgap compound of silicon and carbon whose high breakdown field and thermal conductivity make it the leading material for high-voltage power devices.
- Single CrystalA crystal whose atoms keep one continuous, regular arrangement throughout, with no grain boundaries; the form of silicon used for wafers.
- SOI (Silicon on Insulator)A wafer with a thin silicon layer on a buried oxide, which isolates transistors from the substrate to cut capacitance and leakage.
- Sulfur Hexafluoride (SF6)A very stable fluorine gas used for deep silicon etching such as the Bosch process, and one of the strongest known greenhouse gases.
- TEOS (Tetraethyl Orthosilicate)A liquid silicon precursor, Si(OC₂H₅)₄, vaporised and decomposed by CVD to deposit silicon dioxide films with good step coverage.
- Tungsten (W)Metal with the highest melting point, deposited by CVD from WF₆ to fill contact plugs and form DRAM and 3D NAND word lines.
- Tungsten Hexafluoride (WF6)A tungsten-fluorine compound used as the source gas for depositing tungsten films by CVD in contacts, vias and 3D NAND word lines.
- Wurtzite StructureA hexagonal crystal structure with two alternating atom types stacked ABAB, adopted by GaN, AlN and ZnO and polar along the c-axis.
- Zincblende StructureA cubic crystal structure with the diamond arrangement but two kinds of atoms alternating, adopted by GaAs, InP and most III-V semiconductors.
Related pages
Glossary
Materials terms
- ABF (Ajinomoto Build-up Film)
- Aluminium Nitride (AlN)
- Arsine (AsH3)
- Buffer Layer
- Carbon Tetrafluoride (CF4)
- Compound Semiconductor
- Copper (Cu)
- Crystal Defect (Lattice Defect)
- Crystal Plane Orientation
- Crystal Structure
- Diborane (B2H6)
- Dislocation
- Electronic Grade Chemicals
- Gallium Arsenide (GaAs)
- Gallium Nitride (GaN)
- Hexagonal Boron Nitride (hBN)
- Hydrogen Bromide (HBr)
- IGZO (Indium Gallium Zinc Oxide)
- II-VI Compound Semiconductor
- Indium Phosphide (InP)
- Interplanar Spacing (d-spacing)
- Lattice Constant
- MEMS (Micro-Electro-Mechanical Systems)
- Miller Index
- Nitrogen Trifluoride (NF3)
- Phosphine (PH3)
- Plastic Deformation
- Silicon (Si)
- Silicon Carbide (SiC)
- Single Crystal
- SOI (Silicon on Insulator)
- Sulfur Hexafluoride (SF6)
- TEOS (Tetraethyl Orthosilicate)
- Tungsten (W)
- Tungsten Hexafluoride (WF6)
- Wurtzite Structure
- Zincblende Structure
Last updated: November 1, 2026