Semiconductor Fundamentals: Key Terms Explained
The physics and basic process concepts that the rest of the glossary builds on: what makes silicon a semiconductor, how a transistor switches, and how a wafer becomes a chip.
Why the basics matter
Every process step in a fab exists to control a small number of physical quantities: where electrons and holes can move, how much current a transistor passes when it is on, and how little it leaks when it is off. Terms such as band gap, doping, carrier mobility and threshold voltage describe those quantities, so they reappear in lithography, deposition, implantation and test.
The front-end of chipmaking builds transistors and wiring on the wafer; the back-end cuts the wafer into dies, packages them and tests them. Yield, cleanroom class and process node are the shared vocabulary used to judge how well the whole flow works.
How to use this section
Start with the device physics terms if you are new to semiconductors, then follow the links in each entry to the process step where the concept matters. Each term page has a diagram, a short FAQ and the sources it was checked against.
All fundamentals terms (50)
- ASIC (Application-Specific Integrated Circuit)An integrated circuit designed for one specific application, giving the best performance and power efficiency for that task.
- Avalanche BreakdownReverse breakdown of a pn junction in which field-accelerated carriers create new carriers in a chain, sharply raising current.
- Avalanche Photodiode (APD)A photodiode biased near breakdown so that light-generated carriers multiply by impact ionisation; SPADs detect single photons.
- Back-End EquipmentThe machines used after wafer processing to test, thin, dice, bond, encapsulate and finally test semiconductor chips.
- Band GapThe energy range between the valence and conduction bands where no electron states exist; it sets whether a material conducts and how it handles voltage, heat and light.
- Bipolar Junction Transistor (BJT)A three-terminal transistor made of two pn junctions, in which a small base current controls a much larger collector current.
- Carrier ConcentrationThe number of free electrons or holes per cubic centimetre of a semiconductor; set by doping and temperature, it determines resistivity together with mobility.
- Carrier MobilityHow fast electrons or holes drift through a semiconductor per unit electric field, in cm²/V·s; higher mobility means more current and faster transistors.
- Carrier RecombinationThe process in which a free electron meets a hole and both disappear, releasing energy as light or heat; the basis of LEDs and a loss in solar cells.
- Copper Interconnect (Damascene Process)The use of copper for a chip's multilevel wiring, formed by etching trenches in dielectric, filling them with copper and polishing back.
- Deep Reactive Ion Etching (DRIE)A dry etching technique that cuts deep, nearly vertical holes and trenches in silicon, used for MEMS, TSVs and power device trenches.
- DepositionThe processes that add thin films of insulator, metal or semiconductor onto a wafer; CVD, PVD and ALD are the main methods.
- Dielectric Constant (k Value)A measure of how strongly an insulator polarises in an electric field; chips need high k in gates and low k between wires.
- DiodeThe simplest semiconductor device, which lets current flow in one direction only; based on a pn junction.
- Direct and Indirect BandgapWhether a semiconductor's conduction band minimum and valence band maximum share the same momentum; it decides how well it emits light.
- Discrete SemiconductorA semiconductor component with a single function, such as one diode or transistor in a package, as opposed to an integrated circuit.
- Donor and AcceptorThe two kinds of dopant that set a semiconductor's conductivity type: donors supply electrons (n-type), acceptors supply holes (p-type).
- DUV LithographyOptical lithography using 248 nm KrF or 193 nm ArF excimer lasers; still the workhorse for most layers in chip production.
- Epitaxy (Epitaxial Growth)Growing a thin single-crystal film whose atoms line up with the crystal of the substrate underneath; used for epi wafers, strained channels and GaN.
- FEOL / BEOL (Front-End of Line / Back-End of Line)The two halves of wafer processing: FEOL builds the transistors, BEOL builds the multilevel wiring that connects them.
- Fermi LevelThe energy at which an electron state would be occupied with a probability of one half; on band diagrams it shows conductivity type and carrier density.
- Field-Effect Transistor (FET)A transistor in which the voltage on a gate controls current between source and drain through an electric field; MOSFETs are the main type.
- Front-End EquipmentThe collective name for the tools that build transistors and interconnects on silicon wafers, from lithography and etch to deposition, cleaning and metrology.
- HeterojunctionA junction between two different semiconductors, such as AlGaAs and GaAs, whose band offsets confine electrons and light.
- High Electron Mobility Transistor (HEMT)A field-effect transistor whose channel is a two-dimensional electron gas at a heterojunction, giving high mobility for RF amplifiers and GaN power devices.
- Integrated Circuit (IC)A device in which transistors, resistors, capacitors and wiring are built together on a single semiconductor chip.
- Ion ImplantationDoping by ionising dopant atoms, accelerating them and firing them into the wafer, with depth set by energy and amount set by dose.
- Laser Diode (LD)A semiconductor device that amplifies light from a pn junction in an optical resonator to emit narrow, coherent laser light.
- Light-Emitting Diode (LED)A diode that emits light when electrons and holes recombine at its pn junction; its colour is set by the material's band gap.
- LOCOS (Local Oxidation of Silicon)An isolation method that grows thick oxide only where silicon nitride does not cover the wafer, separating neighbouring transistors.
- Mean Free PathThe average distance a gas molecule or plasma particle travels between collisions; it grows as pressure falls.
- N-type and P-type SemiconductorThe two kinds of doped semiconductor: n-type, where donor atoms supply free electrons, and p-type, where acceptor atoms create holes.
- PhononA quantum of lattice vibration in a crystal; phonons scatter carriers, carry heat and enable light absorption in silicon.
- PhotodiodeA light-sensing diode that turns light into an electrical current proportional to its intensity; the basic element of image sensors.
- Photovoltaic EffectThe generation of a voltage when light strikes a material, typically a pn junction; the working principle of solar cells and photodiodes.
- PN JunctionThe boundary between p-type and n-type regions in one crystal; its depletion region and built-in barrier let current flow in one direction only.
- Quantum WellA thin low-bandgap layer between higher-bandgap layers that confines carriers; the light-emitting core of most lasers and LEDs.
- Rate-Limiting StepThe slowest of several sequential processes, which sets the overall rate; it decides how CVD and thermal oxidation behave.
- Schottky Barrier Diode (SBD)A diode that uses the barrier at a metal-semiconductor junction, giving low forward voltage and very fast switching.
- Schottky Junction (Schottky Barrier)A rectifying metal-semiconductor junction whose energy barrier lets current flow mainly one way; used in Schottky diodes and HEMT gates.
- Self-AlignmentA process technique that uses an existing structure as a mask so the next pattern lands in place without lithographic alignment.
- SemiconductorA material whose conductivity lies between metals and insulators and can be controlled by doping, voltage or light; the basis of every transistor and chip.
- Semiconductor Manufacturing ProcessAll the steps that build transistors and interconnects on a silicon wafer and turn it into tested, packaged chips, from front end to back end.
- Shallow Trench Isolation (STI)Electrically separating neighbouring transistors by etching shallow trenches into silicon and filling them with oxide; standard since the 0.25 µm generation.
- Sidewall SpacerA thin wall of insulator left on the sides of a gate or other step, formed without alignment and used for LDD, salicide and SADP.
- Skin EffectThe tendency of alternating current to crowd near a conductor's surface as frequency rises, raising resistance and signal loss.
- Solar Cell (Photovoltaic Cell)A semiconductor device in which light striking a pn junction creates a voltage, converting sunlight directly into electricity.
- Two-Dimensional Electron Gas (2DEG)A thin sheet of electrons at a heterojunction that can move only in-plane; the current channel of GaAs and GaN HEMTs.
- Zener BreakdownReverse breakdown of a heavily doped pn junction caused by electrons tunnelling across the bandgap, usually below about 5 V.
- Zener DiodeA diode designed to conduct in reverse at a set breakdown voltage and hold that voltage nearly constant.
Fundamentals comparisons
Related pages
Glossary
Fundamentals terms
- ASIC (Application-Specific Integrated Circuit)
- Avalanche Breakdown
- Avalanche Photodiode (APD)
- Back-End Equipment
- Band Gap
- Bipolar Junction Transistor (BJT)
- Carrier Concentration
- Carrier Mobility
- Carrier Recombination
- Copper Interconnect (Damascene Process)
- Deep Reactive Ion Etching (DRIE)
- Deposition
- Dielectric Constant (k Value)
- Diode
- Direct and Indirect Bandgap
- Discrete Semiconductor
- Donor and Acceptor
- DUV Lithography
- Epitaxy (Epitaxial Growth)
- FEOL / BEOL (Front-End of Line / Back-End of Line)
- Fermi Level
- Field-Effect Transistor (FET)
- Front-End Equipment
- Heterojunction
- High Electron Mobility Transistor (HEMT)
- Integrated Circuit (IC)
- Ion Implantation
- Laser Diode (LD)
- Light-Emitting Diode (LED)
- LOCOS (Local Oxidation of Silicon)
- Mean Free Path
- N-type and P-type Semiconductor
- Phonon
- Photodiode
- Photovoltaic Effect
- PN Junction
- Quantum Well
- Rate-Limiting Step
- Schottky Barrier Diode (SBD)
- Schottky Junction (Schottky Barrier)
- Self-Alignment
- Semiconductor
- Semiconductor Manufacturing Process
- Shallow Trench Isolation (STI)
- Sidewall Spacer
- Skin Effect
- Solar Cell (Photovoltaic Cell)
- Two-Dimensional Electron Gas (2DEG)
- Zener Breakdown
- Zener Diode
- Front-end vs back-end process: what is the difference?
Last updated: November 1, 2026