Thin Film Deposition Terms: CVD, ALD and PVD Explained
How thin films of insulators, metals and semiconductors are grown on the wafer: chemical vapour deposition, atomic layer deposition, sputtering, epitaxy and plating.
Building the layers of a chip
A modern chip contains dozens of deposited layers. CVD reacts gases on the wafer surface, ALD builds films one atomic layer per cycle for near-perfect conformality, and PVD (sputtering) knocks atoms off a target onto the wafer. Electroplating fills copper wiring, and epitaxy grows crystalline layers that continue the wafer's lattice.
The choice of method is a trade-off between film quality, conformality over 3D structures, throughput and the temperature the device can tolerate.
Japanese suppliers
Tokyo Electron, KOKUSAI ELECTRIC, ULVAC and others build deposition systems, and Japanese chemical companies supply precursors, sputtering targets and plating chemistry.
All deposition terms (30)
- ALD (Atomic Layer Deposition)A deposition method that grows films one sub-atomic-layer cycle at a time using self-limiting surface reactions, giving precise thickness and conformal coverage.
- Area-Selective Deposition (ASD)A deposition technique that grows a film only on chosen materials on the wafer surface, so the pattern aligns itself to the structures below.
- Barrier Metal (Diffusion Barrier)An ultra-thin metal layer, typically TaN/Ta, that wraps copper wiring to stop copper diffusing into the dielectric and silicon and to help it adhere.
- BPSG / PSG (Borophosphosilicate Glass)A silicon oxide glass doped with a few percent of boron and phosphorus that softens and flows when heated, used to smooth the pre-metal dielectric.
- Collimator (Collimated Sputtering)A honeycomb plate placed between the target and wafer that passes only near-vertical sputtered atoms, improving coverage at the bottom of holes.
- CVD (Chemical Vapour Deposition)A family of deposition methods in which precursor gases react on a heated or plasma-exposed wafer and leave a solid thin film behind.
- DC Discharge (Glow Discharge)A plasma created by applying a DC voltage between two electrodes in a low-pressure gas; the basis of DC sputtering of metals.
- EOT (Equivalent Oxide Thickness)The thickness of silicon dioxide that would give the same capacitance as a given gate dielectric; the key figure for comparing high-k gate stacks.
- Ferroelectric Hafnium Oxide (HZO)A doped hafnium oxide thin film, typically mixed with zirconium oxide, that keeps a switchable electric polarisation and is studied for new memories.
- Flowable CVD (FCVD)A CVD method that deposits a liquid-like film which flows into narrow, deep trenches and is then cured into silicon oxide.
- Gate StackThe set of thin films that forms a MOSFET gate: interfacial layer, high-k dielectric, work-function metals and fill metal.
- High-k DielectricAn insulator with a much higher permittivity than silicon dioxide, used so the gate dielectric can be physically thicker and leak less.
- HKMG (High-k Metal Gate)The transistor gate technology that pairs a hafnium-based high-k dielectric with metal electrodes, replacing SiO₂ and polysilicon gates.
- Insulating Film (Dielectric Film)A thin film that does not conduct electricity, used to isolate wires, electrodes and devices; high-k for gates, low-k between wires.
- Interlayer Dielectric (ILD)The insulating film between and around the metal wiring layers of a chip, which prevents shorts and should add as little capacitance as possible.
- Low-k DielectricAn insulating material with lower permittivity than silicon dioxide, used between interconnect wires to reduce capacitance, signal delay and power.
- Magnetron SputteringA sputtering method that places magnets behind the target to trap electrons near its surface, creating a dense plasma and faster deposition.
- MBE (Molecular Beam Epitaxy)A crystal growth method that directs beams of evaporated atoms at a substrate in ultra-high vacuum, building single-crystal films layer by layer.
- Oxide Film (Silicon Dioxide)In chip making, usually a silicon dioxide (SiO₂) film, grown by oxidising silicon or deposited by CVD, used as an insulator, mask and isolation layer.
- PassivationMaking a surface chemically and electrically inactive, especially the protective nitride or polyimide film that covers the top of a finished chip.
- PECVD (Plasma-Enhanced Chemical Vapour Deposition)A CVD method that uses plasma to break up precursor gases, so dielectric and other films can be deposited at roughly 200-400°C instead of the 600-900°C of thermal CVD.
- Plating AdditivesSmall amounts of organic compounds added to copper electroplating baths so trenches and vias fill from the bottom up without voids.
- PrecursorA compound containing the element to be deposited, delivered as a vapour to a CVD or ALD chamber where it reacts to leave a thin film.
- Replacement Metal Gate (RMG)A gate-last process that forms the transistor with a dummy polysilicon gate, then removes it and fills the opening with a high-k/metal gate stack.
- Spin-On Glass (SOG)A liquid silicon-oxide precursor that is spin-coated onto the wafer and cured into an SiO₂-like film, used for planarisation and gap fill.
- SputteringA physical vapour deposition method in which ions from a plasma knock atoms out of a target, which then coat the wafer as a thin film.
- Sputtering TargetThe plate of high-purity metal or compound that is eroded by ions during sputtering and provides the material for the deposited film.
- Step CoverageA measure of how evenly a deposited film covers the tops, sidewalls and bottoms of trenches and holes on the wafer.
- StoichiometryThe state in which a compound's elements are present in the exact ratio given by its formula, such as 3:4 for Si₃N₄; thin films often deviate from it.
- Vacuum Evaporation (E-beam Evaporation)A PVD method that heats a material in vacuum until it evaporates, letting the vapour condense on the substrate as a thin film.
Deposition comparisons
Related pages
Glossary
Deposition terms
- ALD (Atomic Layer Deposition)
- Area-Selective Deposition (ASD)
- Barrier Metal (Diffusion Barrier)
- BPSG / PSG (Borophosphosilicate Glass)
- Collimator (Collimated Sputtering)
- CVD (Chemical Vapour Deposition)
- DC Discharge (Glow Discharge)
- EOT (Equivalent Oxide Thickness)
- Ferroelectric Hafnium Oxide (HZO)
- Flowable CVD (FCVD)
- Gate Stack
- High-k Dielectric
- HKMG (High-k Metal Gate)
- Insulating Film (Dielectric Film)
- Interlayer Dielectric (ILD)
- Low-k Dielectric
- Magnetron Sputtering
- MBE (Molecular Beam Epitaxy)
- Oxide Film (Silicon Dioxide)
- Passivation
- PECVD (Plasma-Enhanced Chemical Vapour Deposition)
- Plating Additives
- Precursor
- Replacement Metal Gate (RMG)
- Spin-On Glass (SOG)
- Sputtering
- Sputtering Target
- Step Coverage
- Stoichiometry
- Vacuum Evaporation (E-beam Evaporation)
- ALD vs CVD: what is the difference?
- CVD vs PVD: what is the difference?
- PECVD vs LPCVD: what is the difference?
- MOCVD vs MBE: what is the difference?
Last updated: November 1, 2026